Atlas Copco XAS 185 DD(G)7

185 CFM, 100 PSI Rotary Screw Compressor

 
The XA(T,H)S 70-185 KD7/DD7 range of portable air compressors from Atlas Copco is an innovative range of single axle, oil-injected rotary screw compressors.Powered by a 3-cylinder KUBOTA engine or a 2 or 3-cylinder DEUTZ engine, the Series 7 compressor will provide a reliable source of compressed air to drive various pneumatic tools, including chipping and jackhammers, nut runners,

 
Powered by a 3-cylinder KUBOTA engine or a 2 or 3-cylinder DEUTZ engine, the Series 7 compressor will provide a reliable source of compressed air to drive various pneumatic tools, including chipping and jackhammers, nut runners, grinders and hammers.

• Full 3 year factory supported warranty.
• Units can be operated in the vicinity of hospitals, schools, residential areas and even at night and comply with international.
• Improved resistance to corrosion and higher resale value.
• Easy accessibility for service and maintenance.
• High capacity transparenty fuel tank for high fuel autonomy.
• Few moving parts allow for long working life.
• Single panel easy to monitor and control.
• Engine Speed adapts to air demand providing economical power and fuel consumption and Stable air flow.
• Meets the strictest environmental requirements (97/68/EC Com III (Europe), Tier II & Tier IV Interim (U.S.)).
• Long service intervals and low operating costs.

Atlas Copco XAS 185 JD7 HardHat

185 CFM, 100 PSI Rotary Screw Compressor

 
The XAS 185 JD7 Hardhat portable air compressors from Atlas Copco features a revolutionary polyethylene canopy design – the toughest in the industry. It will not rust, dent, corrode or fade, and it resists extreme temperature. The canopy protects the compressor from damage at the worksite, which helps reduce the cost of ownership and boost resale value. Because it can “take a beating” in a variety of applications, it’s ideal for the rental industry.

• Hardhat Polyethylene canopy resists rusting, fading, scratching, denting, and extreme temperatures. Eliminates repair costs and down time as a result of external damage. The most attractive design in the industry.
• Compressor only requires 49 HP (EPA CARB compliant) thus offers lower fuel consumption and less wear and tear than competition.
• Guaranteed free air delivery in accordance with ISO 1217 ed. 3 1996 annex D measured at the outlet valves.
• Direct driven element allows compressor to only require 2750 RPM (lowest in the market), no gear box, no power loss, no extra seals.
• Torsion bar suspension provides better stability than leafsprings.
• Large canopy with removable side panels for easy access to all major components. Front baffle easily removed for cooler cleaning.
• Long service intervals and low operating costs.
• Compliant with ISO1217 ed.3 1996 annex D. with Performance measured at discharge valves.

Atlas Copco XA(S) 300 DD7

200 CFM, 100-175 PSI Rotary Screw Compressor

The XA(H)S 250-300 range of portable air compressors from Atlas Copco is an innovative range of single axle, oil-injected rotary screw compressors. Powered by a 4-cylinder DEUTZ engine, the compressors will provide a reliable source of compressed air to drive various pneumatic tools, including chipping and jackhammers, nut runners, grinders and hammers, or for smaller abrasive blasting and cleaning applications.

 
All compressors are manufactured in accordance with Atlas Copco’s Quality and Environment Management System. This system complies fully with ISO 9001 and ISO 14001. All Atlas Copco compressors are tested to perform under the most demanding conditions.

• Units can be operated in the vicinity of hospitals, schools, residential areas and even at night and comply with international legislation
• Measured at the outlet valves, you get the amount of air you pay for
• Improved resistance to corrosion and higher resale value
• Fewer parts for Easy accessibility for service and maintenance providing Reliability second to none and long working life
• Toolbox is standard
• Single Panel making the compressor Easy to monitor and control.
• Engine speed adapts to air demand for economical power and fuel consumption and stable air flow
• Compliant with exhaust emission standards 97/68/EC step II (Europe), EPA Tier II & Tier III (U.S.)
• Customizable. Flexibility in configuring for the right application.
• Easy accessibility for service and maintenance

Atlas Copco XAHS 350 DD6

350 CFM, 100-200 PSI Rotary Screw Compressor

The XA(H,V,T)S 300-375 DD6 range of portable air compressors from Atlas Copco is an innovative, state-of-the-art series of oil-injected rotary screw compressors, powered by reliable Deutz diesel engines. The modular design of these single axle units allows you to add many options to suit your needs and applications.

 
All compressors are manufactured in accordance with Atlas Copco's Quality and Environment Management System. This system complies fully with ISO 9001 and ISO 14001. All Atlas Copco compressors are tested to perform under the most demanding conditions.

• Units can be operated in the vicinity of hospitals, schools, residential areas and even at night and comply with international legislation
• Measured at the outlet valves, you get the amount of air you pay for
• Improved resistance to corrosion and higher resale value
• Fewer parts for Easy accessibility for service and maintenance providing Reliability second to none and long working life
• Toolbox is standard
• Single Panel making the compressor Easy to monitor and control.
• Engine speed adapts to air demand for economical power and fuel consumption and stable air flow
• Meets the strictest environmental requirements
• Customizable. Flexibility in configuring for the right application.

Atlas Copco XATS 350 DD6

350 CFM, 100-200 PSI Rotary Screw Compressor

The XA(H,V,T)S 300-375 DD6 range of portable air compressors from Atlas Copco is an innovative, state-of-the-art series of oil-injected rotary screw compressors, powered by reliable Deutz diesel engines. The modular design of these single axle units allows you to add many options to suit your needs and applications.

 
All compressors are manufactured in accordance with Atlas Copco's Quality and Environment Management System. This system complies fully with ISO 9001 and ISO 14001. All Atlas Copco compressors are tested to perform under the most demanding conditions.

• Units can be operated in the vicinity of hospitals, schools, residential areas and even at night and comply with international legislation
• Measured at the outlet valves, you get the amount of air you pay for
• Improved resistance to corrosion and higher resale value
• Fewer parts for Easy accessibility for service and maintenance providing Reliability second to none and long working life
• Toolbox is standard
• Single Panel making the compressor Easy to monitor and control.
• Engine speed adapts to air demand for economical power and fuel consumption and stable air flow
• Meets the strictest environmental requirements
• Customizable. Flexibility in configuring for the right application.

Atlas Copco XAS 375 DD6

375 CFM, 100-200 PSI Rotary Screw Compressor

The XA(H,V,T)S 300-375 DD6 range of portable air compressors from Atlas Copco is an innovative, state-of-the-art series of oil-injected rotary screw compressors, powered by reliable Deutz diesel engines. The modular design of these single axle units allows you to add many options to suit your needs and applications.

 
All compressors are manufactured in accordance with Atlas Copco's Quality and Environment Management System. This system complies fully with ISO 9001 and ISO 14001. All Atlas Copco compressors are tested to perform under the most demanding conditions.

• Units can be operated in the vicinity of hospitals, schools, residential areas and even at night and comply with international legislation
• Measured at the outlet valves, you get the amount of air you pay for
• Improved resistance to corrosion and higher resale value
• Fewer parts for Easy accessibility for service and maintenance providing Reliability second to none and long working life
• Toolbox is standard
• Single Panel making the compressor Easy to monitor and control.
• Engine speed adapts to air demand for economical power and fuel consumption and stable air flow
• Meets the strictest environmental requirements
• Customizable. Flexibility in configuring for the right application.

Atlas Copco XA(T)S 375 JD6

375 CFM, 150 PSI Rotary Screw Compressor

 
Atlas Copco is the leading manufacturer of portable compressed air machines in the world, and through constant research and technology, superior products are developed. The combination of performance, reliability, economy and convenience has resulted in an innovative range of single axle high capacity air compressors used in a variety of industries.

 
These portable compressors are workhorses. Featuring Atlas Copco’s new C111 element for improved compression efficiency, the XAS 375 JD6 and the XATS 375 JD6 are ideal for demanding applications including sandblasting and plumbing. The XC 2002 control module with LCD display puts integrated engine electronics for performance and diagnostics at your fingertips.

• Less horsepower required than the competition leading to less wear and tear, and better fuel efficiency.
• Larger protected coolers provide exceptional cooling in extreme conditions, no risk of damage, but still accessible via gull wing doors.
• Right side up compressor oil filter allows for clean switch as oil drains out when unit is turned off.
• Large toolbox holds up to 2 breakers and 1 hose.
• Torsion Bar Suspension provides exceptional grip when pulling at high speeds.
• Very easy to use control module (40 different languages) allows operator to have controls, diagnostics, discharge valves, and pressure regulating valve all in one location.
• Gull wing service doors for excellent access to engine an all major components.
• A-frame Drawbar for added control while towing.
• Tier 3 Compliant engine meets latest EPA requirements.
• 15 inch wheels for above average clearance.
• Customizable. Flexibility in configuring for the right application.
• ¾ and 1½ inch discharge valves.